Skip to content

1-1/2" x 1-5/8 Wall 4" Self Locking Rigid PVC Polyisocyanurate Insulated Pipe

$10.00
SKU SNAPPITZ_1.5IPS_4IN

1-1/2" x 1-5/8 Wall 4" Self Locking Rigid PVC Jacket Polyisocyanurate Insulated Pipe Support ASTM E-84

The Trymer Brand Polyisocyanurate Foam Insulation Pipe Supports are constructed of a special purpose rigid PVC profile extrusion compound jacket with the insulation 4 inches in length.

Uses

  • Cold Water
  • Air
  • Dual Temperature
  • Hot Water
  • Chilled Water Heating
  • Clean Room Application

Physical Properties

Insulation: Polyisocyanurate (Trymer Foam Insulation)
Jacket: Special purpose rigid PVC extrusion compound
Complies with the ASTM E 84-05 Standard Test Method for surface burning characteristics of materials.

Polyisocyanurate (Trymer Foam Insulation) is cleaner and have several advantages over Calcium Silicate. In most cases the Trymer Urethane has adequate compressive strength to meet the requirements of weight bearing loads at the hanger point. The following outlines the characteristics of the Trymer Foam Insulation:

Trymer 2000 – Urethane has the following characteristics:

  • Compressive Strength = 24 p.s.i. average
  • Flexural Strength = 44 p.s.i. average
  • K Factor = .190 @ 75 degree F – aged 180 days
  • Working Temperature Range = -297 degree F to +300 degree F
  • Trymer 2000 insulation is used for 1/2 inch wall thickness insulation inserts.

Trymer 4000 – Urethane has the following characteristics:

  • Compressive Strength = 80 p.s.i. average
  • Flexural Strength = 44 p.s.i. average
  • K Factor = .190 @ 75 degree F – aged 180 days
  • Working Temperature Range = -297 degree F to +300 degree F

Insul-Phen – Phenolic Foam has the following characteristics:

  • Compressive Strength = 3.75 54 p.s.i. average
  • K Factor = .16 @ 250 degree F—aged 7 days
  • Working Temperature Range = -290° F to =250°F
**Trymer is used for 1/2″ and 1″ wall size. Insul-Phen density is used for over 1″ wall thickness size.